How to sync Cox Contour Remote with TV?
If you have the Cox Contour TV service, then it is very possible to have a Cox Contour remote control that accompanies your set-top box. This little gizmo can not only operate the Contour receiver but also the TV. But to start using it, you have to sync it with the TV first, which can be a tedious process. However, the process of syncing the remote is easy and it is explained in this guide.
Things You Must Have Before You Start
- Cox Contour remote
- TV
- Cox receiver box
- TV and receiver’s manuals (optional)
Step 1 – Power on your Devices
Push the power button on your TV and Contour receiver box to switch them on. It is important to ensure that both devices are on before attempting to pair the remote.
Step 2 - Find the TV Input Button
Find buttons on the Contour remote to see what options are available to you. There should be four-color buttons lined horizontally: red, green, yellow, and blue. The yellow button is labeled “TV Input” – this is the key button you’ll use for pairing.
Step 3 – Identifying Your TV Brand
On the rear side of the Contour remote, you will find a list of TV brand names together with their blinking code. Before you begin, find your TV brand name on this list and write down the number code. For instance, if you own a Samsung TV, then your code is 388.
You can also refer to the code sheet that accompanies your user manuals.
Step 4: Switch off the TV
To do this, you may use the remote controller that is already in use in your television set or the power button available on the television. It has to be turned off for the next step of the pairing process to begin in the following pairing.
Step 5 – Hold Down Buttons
With your TV now off, take the Contour remote and hold down two buttons simultaneously:
1. The TV Input button
2. The # button is located on the top row.
When you press this button combination, you will observe that your remote will start blinking red and green lights frequently. Wait for about 3 seconds with the lights blinking green before they finally turn to a steady green color. You can then let go.
Step 6 - Enter TV Code
Next, while continuing to hold down the TV Input button, type in the 3-digit TV code you found in Step 3 using the number pad. For instance, if you press TV Input and hold it all the time when inputting 388.
The remote light will blink twice if the code has been set properly.
Step 7 – Test It Out
Switch your TV back on either using the remote control that you already have or the power button on the TV set. Now try to press the power or volume buttons on the Contour remote. It should be able to switch the TV on and off and regulate the volume.
If the Contour is still not controlling your TV, then redo the pairing using one of the codes for your brand. Even within a brand, not all codes apply to all models that are available in the market.
How to Re-Pair Cox Contour Remote?
If your remote gets out of sync with the TV for any reason, it is very easy to resync the remote to work with the TV again. Follow these quick steps:
1. Insert the two AAA batteries into the remote and press and hold down the STB Power and Setup buttons simultaneously until the light on the remote turns red.
2. Release the call then follow the instructions and press 9-8-7. Light will flash twice in case the offer has been accepted.
3. Follow steps 4-7 from the previous part.
It is a ‘remote reset’ which, when entered by dialing 9-8-7, erases any previous matching. You have to do it from scratch again by using the code from your television set.
Professional Suggestions on Cox Contour Remote
Here are some extra tips to help you get the most out of your Cox Contour remote after initial setup:
- Set your remote to turn both the television and the Contour box on and off simultaneously. To reset the unit, press and hold the STB Power and TV Input buttons simultaneously until the light blinks twice.
- To change between using the Switch remote to control the Contour vs the TV, press the STB Power or TV Input buttons.
- Connect to other devices such as a soundbar by holding down the Mode button and then inputting the device code.
- Change what each colored button does in the Settings menu on your Contour receiver.
If assistance is required from Cox, don’t hesitate to seek it.
It seems you have to pair your remote via a complicated process but if I tell you the steps it only will take a minute. If you face any problem in syncing your remote then it is recommended to go through the Cox support team. They are always able to guide you through the process of diagnosing or shipping a new remote if one is required.
With this guide, you now have the basic information at your fingertips to ensure your Cox Contour remote is consistently paired with your television set. You will then be able to continue streaming your TV shows, sporting events, movies, and more with full command of the remote.
Call (844) 340-5111 to get a new Cox connection now!
Read More:
How Do I Change My Wi-Fi Name and Password Cox?
How Do I Change the Password on My Cox Wi-Fi?
How Do You Change Your Cox Wi-Fi Password?
