If one has a Cox cable box, he/ she can easily get to see several programs and programs on demand. However, managing all that content often can be a bulky affair, especially without a good remote control. This particular remote for Cox cable can operate both the cable box and the television. It also means that programming it properly gives you full access to all your viewing possibilities. This short guide will show you how to sync your Cox cable remote to your TV, and it will only take you a few minutes.
Things You'll Need:
- Cox cable remote
- TV
Step 1 – Power on your television set
Begin by switching on your television set and make sure that it is operational on the right input mode for the cable box. Do not attempt to sync the remote if the television is turned off because you will not be able to do it effectively.
Step 2 – Search for the Code of Your TV Brand
On the back of your Cox cable remote, there should be a code list of different TV brand names and corresponding codes. Locate the model number of your TV and take note of the 3 or 4-digit code that appears after the brand name. This code will enable you to operate some basic functions on the TV by using the remote.
Step 3 – Entering Programming Mode
To get the remote into programming mode, press the ‘TV Power’ button on the remote until the LED/light at the top illuminates twice. This means that you have coded the programming mode successfully.
Step 4 – Input your TV code.
When the light at the display panel blinks twice, use the number buttons to cautiously enter the 3 or 4-digit code associated with the brand of your television. When the code has been set, the LED will blink one time.
Step 5 - Testing Software Basic Functions
Upon entering the code, attempt to operate the remote power, volume, and mute to determine if these are functional on the TV. Try touching the TV power button if you want to test whether your TV is functional and if you can turn it off/on. Change the volume up and down and also press the mute button to ensure that they are functional.
Step 6 – Familiarize yourself with all the functions
Check whether arrow keys, channel controls, inputs, and the guide also work well on the TV itself. In this configuration, the power button, volume, and mute should work as soon as the code has been entered; other keys may require later programming.
Step 7 – Repeat Setup if Needed
If certain functions such as the arrow keys or inputs do not work to control the TV, try programming the remote again using a different code from the one at the back of the remote. Switch through each code for your TV brand separately until you reach the one that gets all the keys operating correctly.
Advanced Programming
If repeating coding does not work, you may need to program individual keys like input, aspect ratio, menu controls etc. To program these specialty keys:
1. First, turn off the TV power and then press the respective TV power button which you want to program. Cherish both for 3 seconds until the LED blinks twice.
2. Locate the three-digit code on the instruction manual/website for that function and type it in. The LED will light up to signify that the information has been successfully recorded.
3. After doing this, try to establish if the key you assigned the function to now controls that function on your TV.
4. Do the same for any other function that needs to be programmed.
Once you have keyed in the sample code provided on your TV brand’s list, a normal Cox remote should be able to control volume, power, channels, and most basic functions. However, if any function does not respond or if it controls the cable box instead of the TV, go through the steps of the key-by-key programming mentioned above in the advanced section. Technically between the coding list and individual programming, you should achieve every button to be functional for full hands-free.
Troubleshooting Tips
Here are some helpful tips if you're still having remote issues after following this programming guide:
- Sometimes, you should try replacing the batteries of the remote - sometimes a low power supply may interfere with the signals.
- Inspect the cables connecting the box/TV and confirm that the TV is on the right channel.
- The first and simplest troubleshooting technique is to use a standard reset by disconnecting and then reconnecting various devices.
- Delete all the previous programming that may have been stored in the cable box and the remote to eliminate any interference.
- To synchronize the remote manually, press and hold the MENU and LIST buttons for 5 seconds.
- If the issue is not resolved after several attempts at coding, then call your cable provider.
Seek Assistance from Service Provider
If you are still struggling to have a properly functioning Cox remote then you should reach the Cox customer service. They can explain to you the latest methods of fixing the problem or they can dispatch a technician that will set everything for you. By following the above guide and making a couple of customer service calls, you’ll get that annoying remote working again in no time. Then you can spend more time in front of your television set and less time on programming different gadgets.
Call (844) 340-5111 to get a new Cox connection now!
Read More:
How to Change My Wi-Fi Name and Password Cox?
How to Change Name and Password on Cox Wi-Fi?
How to Change Wi-Fi Name and Password Cox?
How to Change Wi-Fi Password on Cox?
How to Connect to Cox Wi-Fi Hotspot?
