Detailed procedure to follow when programming Cox remote to the television.
Altogether, learning how to program a Cox remote for your television involves simple processes that take little time. I will outline the process through which you can easily program your Cox remote to control both your cable box and television. Below is a step-by-step guide on how to program a Cox remote to a TV.
Things You’ll Need:
- Cox remote control
- TV to connect “remote to
- Additional documentation with instructions that may come with the TV set (optional).
Step 1 – Identify Your Cox Remote Control Model
A Cox remote can be vastly different in terms of how it is set up. Before proceeding, make sure that you know the model of your Cox remote for a successful match. Common types of Cox remotes include:
- Contour Remote
- Universal DVR Remote
- Universal Cable Remote
The model should be printed on the bottom or back of the remote itself to avoid interference with the movement of the ‘cursor’. Knowing the exact model will enable you to follow the right programming steps.
Step 2 – Turn on Your Television
Before going through the process of programming the remote control, turn on the television that you want to operate. During remote programming you will be required to press some buttons which are related to the TV, hence the TV ought to be on.
Ensure that the TV is set to the right input source channel which is used to display the video from your cable box if connected.
The third step is to identify the TV Programming Mode Button.
It is important to note that almost all Cox remotes will have a TV programming/setup button that may be labeled as such or in some cases could represent the function on the button itself. This is usually accompanied by the letter “TV” for television or a similar term. Also, look for other similar buttons with labels like ‘program’ or ‘code search’.
Long press this TV button for 3-5 seconds and you will see an indicator light blink at the back of the remote. This indicates that the buttons on the remote have been pressed in a particular manner to get into a special programming mode.
However, if your programmed remote does not come with a TV button, then you may need to use television-specific keys as described in the user manual.
Step 4 – Search for TV Programming Code This step involves searching the internet for TV programming code which is then executed to proceed to the next step.
With the remote in programming mode, start sending numeric codes that correspond to your TV brand. Check the instruction manual that came with the television or use the one provided on the TV manufacturer’s website to locate the 3, 4, or 5-digit numeric code for the television.
Here are some of the most common brand codes:
LG – 0413, 6802
Samsung – 0008, 7446
Sony – 0632, 0461
Vizio – 0348, 1144
After entering each code, you need to press the power button of the remote which is sited at the side of the number pad. Let us wait for a few seconds and observe if the TV reacts and shuts down.
If the TV does not recognize the command, proceed to the next code in the sequence and perform the same steps. Continue to do this until the code that controls your TV is located.
Step 5 – Verify other controls and test volume
The other buttons placed on the remote should work the functions of your TV if the remote is programmed with the correct code.
Try to press buttons like volume up/down, mute, input, and others like channel and power buttons to check compatibility. As a last note, before you exit the programming mode, it is recommended that you experiment with the different features.
If the above commands do not work, then go back through the steps above and look for another bit of programming code more closely related to your TV make.
Step 6 – Exit Programming Mode
Since the major functions of the remote are confirmed to work with your TV, tap the exit button to come out of the programming mode. Thus, to exit from most Cox remote models, all you need to do is press the TV button or the OK/Select button. Consult the instructions section relevant to your model.
That’s it, the process is over! The Cox cable box should now be programmed to work with the television at any given time with the use of the remote. Programming is only done once for the life cycle of the remote hence it will be efficient in the long run.
How to Fix Cox Remote TV Buttons Not Working?
If after programming, your remote still won’t control certain TV features, here are some troubleshooting tips:
- They suggested that it should be possible to replace the batteries in the remotes with new ones.
- Perform a visual inspection of the remote to identify visible signs of physical damage or blockage of the IR sensor.
- But be sure to aim the remote directly at the TV’s IR receiver
- Next, attempt to re-program the remote from the scratch
Furthermore, there is also Cox Customer Service that one can visit for guided assistance in rewiring a remote. Other programming methods can also be employed to help the technicians identify the correct brand code.
In Summary
Cox cable Technology allows you to synchronize your remote with your TV through simple processes. Thus, by searching for the numeric code of your TV brand and getting into the programming mode, full integration is possible. Turn on and check all primary operations including volume buttons, the mute button, the power button, channel buttons, and inputs. And finally shut down the special programming state on the remote to finish the setup process. This simple guide will have your remote working to control multiple devices in your home entertainment system.
Call (844) 340-5111 to get a new Cox connection now!
Read More:
How to Connect Cox Remote to TV?
How to Set Cox Cable Remote to TV?
Is Cox Internet Down Right Now?
How Do You Program a Cox Remote to a TV?
