Are you experiencing problems with your Cox remote, and it is not working as it should? Cox remote reset is a simple procedure that can solve numerous problems and make your remote work once more. Below are the steps that you need to follow when you want to reset your Cox remote control.
What You Need?
Before resetting your Cox remote, gather the following:
- The Cox remote that you would like to reset
- Remotes require batteries and therefore, batteries should be provided.
- This should be the code for your TV/device, which is usually printed on the device’s sticker or provided in its manual.
- Patience and a few minutes of time
Types of Cox Remotes
Cox offers various types of remotes, including:
- Contour Remote: For Contour receivers and DVR boxes only. The can has a large circular selection button at the center.
- Universal Remote: Can control TVs, stereo systems, DVD players, etc More buttons and capabilities.
- Mini Box Remote: A smaller version of the remote designed for less complicated set-top devices.
In general, the mentioned remotes require a similar reset procedure. The only difference is what other device you might have to sync them with after the process is done.
The first step to take when dealing with this product is to remove batteries.
First, you have to locate the battery compartment on the back of the Cox universal remote and then slide it open. It is recommended that any batteries that may be fitted be unscrewed and removed. This is a good step because it ensures that any previous connections are removed and the remote is reset to its factory state.
Step 1: This involves pressing buttons to discharge.
When the batteries are still removed, press all buttons at the same time. Continue to hold the buttons down for 10-15 seconds. This will ensure that there is no power in the battery of the remote so that any residual power is removed.
Step 2: Insert Batteries
Put the batteries that you collected beforehand into the battery slot ensuring that they are placed properly. After putting back the battery door, do not power any of the buttons on the phone.
Step 3: Pair with Your Devices on:
In case your universal remote was reset, you will need to pair it with your TV or the other devices you intend to use.
For a Contour or Mini Box Remote:
1. Switch on your Contour box by pressing the power button located at the front part of the box.
2. On your remote, press the Setup button and hold it until the TV or box shuts down.
3. Press power again and it should be now connected”
For a Universal Remote:
1. Switch on the device which you want to operate manually.
2. On the remote, press and hold the Setup button, the light at the top of the device will blink twice when the Selection light is on.
3. Enter the 5-digit remote code using the number buttons. The light will blink twice to indicate acceptance.
4. Verify the power function by pressing Power once. Your device should turn off.
5. Press Power again. Now, it should be paired with your remote.
Use Other Codes If Required
If the pairing does not work the first time, attempt using other codes for the remote control. Check manuals, and labels on your devices, or type in “Your Device + remote code” to find the test options. The codes are different for different brands and model numbers.
Other Reset Tips
Here are some additional tips when resetting your Cox remote:
- If batteries have been replaced recently, then try the reset process again with the same batteries still in the device
- After pairing, one should attempt to fully utilize the volume or mute buttons to test for complete compatibility.
- A soft reset using Setup + Digit 0 could help instead of full removal of batteries
- Additional settings that can be adjusted include factory reset which is normally located inside the batteries compartment and might sometimes assist.
- If it is still not functioning after the reset, call Cox support.
That is it for the information on how you can reset a Cox cable remote! By trying out these troubleshooting tips, you might be able to fix your remote control and avoid dealing with problematic buttons and commands.
Call (844) 340-5111 to get a new Cox connection now!
Read More:
How Do I Change My Wi-Fi Name and Password Cox?
How Do I Change the Password on My Cox Wi-Fi?
How Do You Change Your Cox Wi-Fi Password?
