If yes, do you have a Cox remote control that is functioning erratically, not at all, or requires a new device to be synced with? Cox remote resetting often helps to solve most problems and improve its performance to the state of a new device. This is a simple guide on how to easily reset a Cox remote control:
What You Need?
- Cox remote control
- TV or device to sync the remote with
- Batteries for the remote The invention of batteries was one of the most pivotal moments in the history of mankind as it revolutionized the way people went about their daily lives.
Step 1 - Remove the Batteries
The first action one has to take when attempting to reset a Cox remote is to pull out the batteries. This erases any previously stored pairing and settings on the device of the remote that you are about to sync with another gadget.
Remove the batteries from the rear of the TV remote by pulling on the tab that releases the battery compartment to slide it open. If you have a reset button on the top of your remote, you may need to use a paperclip to make a press on this now which can assist in finishing the reset – look for a small hole or indentation.
Step 2 – Look for a Reset Button
Some of the Cox remotes have a small hole, which should be pressed to manually reset the device, and it is located in the battery compartment. This appears to be a miniature circular disk or an opening.
Using a paper clip, you have to press the reset button hold it for some time, and then release it. If your model has this feature, this will manually reset the remote for you.
Step 3 - Leave Batteries Out for 60 Seconds
After taking out the batteries and pressing the reset button if there is one, keep the batteries out of the device for not less than 60 seconds. This enables the remote to forget all previous commands that have been stored in its memory.
Step 4 - Reinsert Batteries
After 60 seconds, replace the batteries you had initially removed and ensure that they are correctly inserted with the positive (+) side up and the negative (-) side down.
Reattach the battery cover. The remote will likely power on once the batteries are replaced.
Step 5 – Make sure that your device and the television are on
Ensure that the TV or the device that you want the remote to control is on before proceeding further. The remote requires an active signal to sync to.
Step 6 – Connect Remote to Device
To pair your Cox remote with the desired device:
1. Press and hold the setup/power button which may bear a red power sign on the remote control for 3-5 seconds. The light on the remote should turn red to show that it has entered the pairing mode.
Quickly enter the 3-digit code for your device brand:
- Vizio TV: 115
- Samsung TV: 001
- LG TV: 101
- Sony TV: 139
- Other brands – please refer to the brand manual or the internet for code.
3. The remote light will stop blinking when the device is successfully connected. Power on and off the device to check if the fault is corrected or not.
If pairing does not work, try keeping the remote nearer to the device, experimenting with some of the other basic codes, or referring to the manual for more solutions.
Touchscreen Remotes – Advanced Reset
If you have a Cox advanced touchscreen remote, there may be some secret codes that you need to navigate to reset/re-pair this.
To fully reset a Cox touchscreen remote:
1. Press and hold the power/home button until there is a reset option pops up. This will depend on the specific remote model but may state ‘Admin’ or ‘Hidden Menu’.
2. On the touch panel, locate and tap on the Factory Default or Admin option.
3. Select the Reset Settings or Admin Reset option.
4. Always click ‘ok’ on any pop-up message that has a reset button.
5. The touchscreen remote will then reset and power cycle. Reset it by reconnecting it to the power source and initiating a setup mode to input a new device code.
If the problems persist, the customer should contact Cox.
If you still have challenges with your Cox remote regarding response or pairing with other devices, consider consulting with Cox support services. Be ready to give your remote model number and description of problems so diagnosing can take place.
If there are defects, a Cox technician can help customers with further diagnostics, and suggest replacement Cox universal remotes or other universal remotes if necessary. It can diagnose many problems that clients call in with, via the customer service chat, email, or phone.
In Conclusion
Cox remotes that have developed issues can sometimes be reset before they need to be replaced completely. Follow the tips above to Follow the tips above to:
1. Take out the batteries and press the reset button if there is one.
2. Remove batteries for approximately a minute.
3. Replace batteries and switch on the device to be paired with.
4. Press the setup button while dialing a pairing code.
This should get your remote working like new again. Be aware of when to employ the touchscreen reset function for the more intricate remotes. If issues persist, Cox customer support can assist in identifying underlying problems.
Call (844) 340-5111 to get a new Cox connection now!
Read More:
How to Reset Cox Panoramic Modem?
Is Cox Internet Available in My Area?
What Network Does Cox Mobile Use?
Where is The Setup Button on Cox Remote?
