Cox remotes may be slightly complicated by the presence of many buttons but the setup button is not hard to locate. The setup button in Cox remotes is useful when you want to program or sync your remote to operate your television, cable box, and more. Carry on reading to know the step-by-step procedure of how to find it.
Cox Remote Model: Steps to Take
Cox provides many options for remotes, thus, the first step is to determine which of them you have. Common Cox remotes include:
- Contour Remote: Black plastic remote with a large circular button located at the top part of the remote. They are used with Contour cable boxes.
- Universal DVR Remote: Wider than the previous one, black plastic with red Cox logo at the top of it. Can control multiple devices.
- Mini Box Remote: Small black plastic control with a flat top. Slated to be used with Cox Mini Boxes.
- Voice Remote: Black remote with a proprietary voice activation button located at the top of the device. Enables you to search for content by speaking to it.
When you know your model, you can look for the setup button.
Locating the Setup Button on a Contour Remote
If you are using the original Contour remote that was included with the Contour TV boxes, the setup button is visible.
It is located on the left side of the remote, more precisely in the middle of its lower part. There will be a button with a red background and the inscription ‘Setup’. This is the way of programming the remote and activating additional functionalities it has built in.
Use the setup button on a Contour remote to:
- Teach the remote to operate the television
- Limit what is available for the Contour receiver’s menu selection
- To set up your Contour box to single and dual mode, follow the instructions below.
- Turn on or off the ability to use the front panel of your cable box
Well, for Contour cable TV customers, it is easy to find the setup button. You just have to find the small red setup button located on the left side of the device.
Locating the Setup Button on Other Cox Remote Models
For other Cox remotes such as the Cox Universal DVR remote or the Cox Mini Box remote, the setup button is located in a similar position.
Head to the left side of the remote control and look roughly in the middle towards the bottom. On the application and interfaces, there will be a round button that has the label ‘Setup’. This is the key that is used for syncing the devices and for setting options.
On the Voice Remote, the setup button lies slightly below the exclusively designated voice button placed on the upper part of the device. Well, that is another convenient place to look for it.
Here’s a quick summary of where to find the setup button on other Cox models:
Contour Remote: Small red button on the left edge of the setup.
Universal DVR Remote: A round setup button located on the left edge
Mini Box Remote: Round setup button on the left edge
Voice Remote: Below the voice button in the upper half
Coincidentally, the setup button is located on the left side on all Cox remotes, which makes it very convenient when you need to pair devices or program functions.
The following steps will help you use the Setup Button on your Cox Remote:
You have located the setup button, but what does it do?
The main function of the setup button is to allow the remote to control your television set and other equipment such as a DVD player, or sound system.
Here’s how to use it:
1. Power on the respective device that is to be programmed (TV, DVD player, etc.).
2. Locate the setup button on your remote control from Cox and then press it.
3. Toggle the mode button for the particular device (TV, AUX) until the mode button blinks twice.
4. To finish, type the 3 or 4-digit code present in the device list in the Cox user guide. It should now be possible to get the device to operate!
5. Perform the same for other devices that you wish to program with your remote control.
The setup button can be used to sync your remote with other devices you own. Therefore when you have a new TV, DVD player, or receiver, you can easily sync them using the setup button.
Troubleshooting the Setup Button
If pressing the setup button doesn’t initiate programming mode, try the following steps:
- Check that the batteries in the remote are new
- Ensure that the device you want to control is turned on
- It is recommended to press and hold the setup button for at least five seconds before inputting codes.
- Enter the same correct 3 or 4-digit code from the list of devices (trying any other code will not work).
- The code may have to be repeated from 2-3 times for the information to be imprinted into the memory of the computer.
In case it still does not work, then the last resort could be to contact Cox customer support. They can guide you on how to reset or re-program the remote in case it is necessary.
Therefore, in conclusion, the setup button is the unlocking that makes your Cox remote work the miracles that it does. Visit your Cox guide for device codes and make it easy for yourself to control your home entertainment.
Call (844) 340-5111 to get a new Cox connection now!
Read More:
How many Ethernet ports does ATT fiber router have?
Is AT&T internet good for streaming?
Is AT&T TV being discontinued?
What is a good home Internet speed?
How long does it take AT&T to install fiber?
